Tuesday, February 10, 2009

A2 Card with a Scalloped Square Opening



I had a request from a blog reader for a simple file for an A2 card with a scalloped square opening. She had an Expression and Plantin Schoolbook but did not have the Accent Essentials cartridge.



The easy way to do this is to simply place the scalloped square from the Accent Essentials cartridge in the appropriate sized rectangle (5.5 x 8.5 inches). Below is a screen shot of the card that would be created. The extra line you see is a temporary rectangle placed on the mat to help in centering the scalloped opening on the front of the card.



If you don't have Accent Essentials (or another cartridge with a scalloped square) here is a quick way to obtain a similar result.



There is a scallop edge on the Plantin Schoolbook cartridge - it is highlighted on the screen shot above. Using the slider bar to adjust the size, the smallest value that can be selected is 1 inch. This results in a very large scallop edge since the one inch dimension refers to the height of the scallop bar.



By using the handle in the lower right corner you can resize the scallop edge proportionately to a suitable size for your card.



Once you have the appropriate size, check "weld" and then copy and paste the strip rotating it at 90 degree intervals each time. Then you can carefully fit the four strips together to form a smooth scalloped square.



The scallop strips are all welded to a square placed in the center of the card front (the square appears as the red dotted line in the screen shot above) - make sure to check weld on the center square. By adding this square you will have a solid scalloped square as the cutout which you can use for another project.



Above is a screen shot of the card when previewed on the design page.



By previewing on a blank page you can see the result a bit more clearly and check to be sure that the scallops are smooth.



I test cut the file before sending it to the person who needed it - here is how it looked after cutting - very plain and simple. Tonight I decided to make a card with my test cut (sometimes these cuts really start to pile up as I keep making new designs and not using the test cuts for actual projects....).



I used a white core paper to test the cut and I didn't like the way the white showed on the inside of the scallop and on the fold line so I decided to ink the edges to hide the white.



I inked all of the edges with a darker shade of green - including the inside of the scallops. Then I added a liner which I adhered to the inside front of the card. I stamped a sentiment on the exposed liner in the scalloped square and added a flower. The sentiment looked a little lost in the space so I added some pen stitching in a coordinating color.



Above is a close up of the layered flower and the "skittle" center



This is just a simple little card but it will be useful for a note. I think that the sentiment might have been better if I stamped it in a different color - maybe I will try another one!

The file is available for you to download if you are in a hurry and don't have time to try to make your own version.

A2 card with scalloped square opening

8 comments:

  1. Diane,
    Your card turned out great! Don't be so hard on yourself - I know, you are a perfectionist!!!
    Thanks for sharing your file, because I don't have Accent Essentials.

    Carmen

    ReplyDelete
  2. I am new to blogging and I enjoy your site. You have some really creative projects. Have you heard anything about a new Design Studio cd coming out. Okieladybug posted something about it on her blog. Seeing that you are so involved with the design studio, I was wondering if you knew anything about it. I am still trying to get familiarized with it.

    Thanks

    ReplyDelete
  3. You are so generous. Thanks for the tutorial, I have both cartridges but it is good to see how to make what I need. I like your card also, it is a sweet sentiment and always appropriate

    ReplyDelete
  4. your so amazing thanks so much for all the hard work you put into all your cut files for all of us
    hugs
    Norine

    ReplyDelete
  5. OMG! Finally! I've found someone who "gets it!"

    First of all, Thank you for the .cut file. I appreciate not having to do all the work, LOL! {perhaps, one day I'll figure out how to share mine.}

    Secondly. I've bookmarked your blog and cannot wait to try some of these things/tutorials.

    And can you stand another question?
    I have the CE with Plantin & Home Decor. I'm wanting to cut a partial opening, say like, the square from Plantin, BUT I only want to cut 3 sides so I can layer over another sheet for a "peek-a-boo" style... {Oh my! does that make sense????} My question... can I like do the copy/paste {so my size stays the same} and then, weld the second square - but only covering one edge, so that only 3 sides cut? If so, could you help me? If not, is there anyway that could be achieved? I'm totally lost, yet still, thinking out loud! Esp. after visiting your blog. Oh the possibilities, LOL!

    TIA for any assistance.

    ReplyDelete
  6. Thank you for sharing!!

    Tanya

    ReplyDelete
  7. thank you for sharing your file
    joanneh

    ReplyDelete

Thanks for taking the time to leave a comment. I love to hear from the people who read my blog. I moderate all comments to keep spam off the blog without making you decode the squiggly letters so your comment may not appear immediately.