Wednesday, January 28, 2009

Eight Pointed Stars



Last October I did a file for a Tag Star using a tag from the Wedding cartridge (here is a LINK to the post) - these are formed by overlapping silhouetted tag shapes and trimming the points to produce a star shape. The photo at the left is the first tag star I designed.


In December, I did two additional versions by request of a reader, using the Tags, Bags, Boxes and More cartridge (here is a LINK to the post for the star and a LINK to the post for the snowflake).







I recently had a request from another reader for a tag star similar to one she had seen on a card - I don't have the photo to post here (and I couldn't use it since it isn't my photo) but the card had a double layered eight pointed star made from diamonds which met directly at the center. If I can get a link to the original design I will try to add it to this post.

At first I thought this would be a simple star to put together, but then I remembered that the diamonds available on the cartridges are of an unusual dimension - the angle is larger than 45 degrees so the eight sided version would not work using a predesigned diamond.

I needed to build the design in pieces. Unfortunately, since elements needed to be turned at angles, I could not make this an adjustable design. However, I did spend the time to do it it three sizes and in both George and Plantin Schoolbook so it would be useful to many people. You can even cut this with only the trial version of the design studio software.



Here is a photo of the three sizes of stars these files will produce.

In order to waste less paper, I adapted the design to eliminate most of the extra length on the points so only slight trimming is required. Below is a photo of the stars before trimming - you could actually use them this way if you like the look!



It is easiest to trim the points by using small, sharp scissors and cutting toward the center - first going around the design in one direction...



So the star looks like this...



and then trimming toward the center and going around the star in the opposite direction.

Below is a photo of the remainder of the paper after removing the stars - another interesting design



Due to the slight difference between the uncuttable area on the baby bug mat and the Expression mat, if you try to cut the George file on the Expression you will have to do a bit of trimming.

Below is a screen shot of the star on the baby bug mat



and a screen shot on the Expression mat - notice how the uncuttable border is a bit wider.



For the Plantin Schoolbook file I moved the design but, I know that some people have the Expression and George but not Plantin so you would need to do a small amount of hand trimming - the cut will look like this on the mat



Trim each side on the angle toward the center







and then carefully remove the cut from the mat (I used my favorite wide putty knife for the job).



(all of the above is irrelevant if you cut the Plantin version on the Expression mat!)

Here are some photos of the various sizes and colors layered to give you some ideas....



Two cuts on a card front



Triple layers in two colors



Same sizes layered in two colors - yellow on top



Same sizes layered in two colors - purple on top



Triple layer variations

I decided to adhere vellum to the stars to build an ornament for a card. I used my Creative Memories Precision Point Adhesive and dotted it on the back side of the frame



When the adhesive dried to clear I adhered the stars to some vellum (this was office supply vellum and not as pure white as I would like but I used it for the test version).



Then, once again trimming toward the center, I cut away the excess vellum



When they were trimmed, I gently curved up the edges...



and then placed the smaller one in the center



Here is the unadorned star on a 5 x 7 card..



I first tried putting the layers together with a foam dimensional



However, I thought it was a bit too high and the center moved out of alignment easily, so I decided to use several glue dots on top of one another to adhere the center - this seemed to be more stable.



If you happen to have this paper stack from last year



....you could even try fussy cutting and adhering the stars on top of the printed stars for an interesting effect.



You can go on to add as much or as little bling as you like - be sure to let the Stickles dry completely or you may end up with a few smears (as I did since I was in a hurry to finish this to photograph and post!)



Don't throw away all the little leftover triangles - you can use them for another project!



There are so many possible variations - I'd love to see some of the cards and ornaments you might make using these cuts.

Eight Pointed Star - George

Eight Pointed Star - Plantin Schoolbook

14 comments:

  1. Love this star. Seems you had a lot of work to make it. Thanks a lot for sharing it with all of us.

    ReplyDelete
  2. Another awesome tutorial! Thank you for another beautiful cut file. These stars are great, and you even found designer paper to match! You never cease to amaze me!!! You ARE the best!!!

    ReplyDelete
  3. Wow!! These are wonderful!!! Thank you so much for making this in George!

    ReplyDelete
  4. Oh Diane, the possibilities are endless with these!! And I have both carts!! I don't have the cart that you made the other beautiful stars out of so I am so happy to have these. Thanks again for another lovely design.

    Vicki

    ReplyDelete
  5. Diane, Thank you so much!!! I can't even describe how happy I am. I tried for so long to try and make this and I got no where with it. You did such an amazing job. You are such a wonderful person for helping me out with this. Thank you again. As soon as I make my card I will send you a link to it, and you are more than welcome to post it here to... after all you did all the hard work.

    Dany

    ReplyDelete
  6. your talents never cease to amaze me. thanks for sharing.

    ReplyDelete
  7. This is awesome!
    TFS

    ReplyDelete
  8. Wow...these are awesome! Thanks for sharing!

    ReplyDelete
  9. This is so pretty, thanks so much for sharing the cut file. You are awesome!

    ReplyDelete
  10. Thank you once again. Such a lot of ideas.

    Betty

    ReplyDelete
  11. How fun! This is beautiful. Thank you for sharing your talents.

    ReplyDelete
  12. Diane, Thanks for sharing your file. I made the eight point star at a Stampin' Up demo last Nov. - very labor intensive. I too have played with various shapes and have created other "stars" but this eight point of yours is BY FAR THE BEST I have seen!! Thanks again! Susan

    ReplyDelete
  13. Thank you so much for sharing these wonderful designs and all your hard work. Can't wait to play.
    Regards Maxine

    ReplyDelete
  14. Can't wait to try a 8 pointed star. Thanks for sharing the file and the great tutorial.
    Fern

    ReplyDelete

Thanks for taking the time to leave a comment. I love to hear from the people who read my blog. I moderate all comments to keep spam off the blog without making you decode the squiggly letters so your comment may not appear immediately.