Friday, November 14, 2008

Joys of the Season Snowflakes in Circles



Are you getting tired of snowflakes yet? (!) Here are the files using the snowflakes on the Joys of the Season cartridge. Once again, these are all adjustable files so you can size them to suit your project.

I think by now you have enough variations to make quite a pretty and varied display. I'd love to see photos of any projects you make using these. Below you can see photos of my test cuts of these files (I finally did some using traditional white instead of the "contemporary" colors I used for the last two posts).








I am starting to wonder if there is a problem with the download site - there are well over 200 downloads of the first two snowflake files but not a single comment has been left on the 4Shared site. My preference is for comments to be left right here on the blog (just click on "comments" at the bottom of any post and, if you do not have a Google account, check "Anonymous" and leave your name or message board identity). However, I would appreciate it if someone would please try to comment ( a quick "thanks!" will do) on the download page - thank you for helping me figure out if I should keep this download system.

More Snowflakes in Circles (A)

27 comments:

  1. Thank you so much for these beautiful .cut files. You have done a great job on all of them.

    I also want to thank you for all the ideas you share with us. They have been so helpful to me. I am so happy that you had shown how to use the mat with so many different papers placed to cut the extra parts of designs. That has saved me so much paper!!

    ReplyDelete
  2. Thank you for sharing your files w us. I'll learn someday...

    cyimbugbitten

    ReplyDelete
  3. Thank you so much for sharing your files with us. It is greatly appreciated. I am a "newbie" but hope to someday make use of your files.

    Threadbear

    ReplyDelete
  4. Love all your work and thank you for sharing

    I know how hard you work on these designs

    ReplyDelete
  5. thanks so much for sharing. i'm a big snowflake lover.

    thanks for you hard work.

    ReplyDelete
  6. HI THANKS FOR SHAREING YOU CUT FILES THEY ARE GREAT THANKS

    SANDRA COLLLIS CRICUT MESSAGE board

    ReplyDelete
  7. Capadia,

    Even though I've not downloaded any of the snowflake images, I'll still say thanks! And, when I went to the 4shared website the last time, it asked you to register to be able to leave a comment (which is different than it used to be... maybe that's why??)

    ReplyDelete
  8. Thanks for the snowflakes. I have many ideas but not a great deal of time to play right now. I love all your designs.

    ReplyDelete
  9. YAY! You made them for a cart i have! I love these - thanks!

    ReplyDelete
  10. left a comment on the download site i had not downloaded the previous ones. I will try to comment in both places if that what you would like. thanks for the awesome file.

    ReplyDelete
  11. These look so cute. I'm finally thinking about my Christmas cards and I just might have to include a snowflake or 2. Thanks for sharing your wonderful snowflakes.

    ReplyDelete
  12. I always love to check out your blog to see what great things you are creating and these snowflakes are wonderful. Thanks so much for sharing them with the rest of us.
    Angie Person MB

    ReplyDelete
  13. Thank you for sharing your wonderful designs with us, Cap...the download went very smoothly with your new system you're using (nice not to get all the questionable pop-ups that come with MediaFire). You're the best!

    Steph Stimson, CDS MB

    ReplyDelete
  14. Please do continue with the good work. I am sure we all appreciate your wonderful idease. Many thanks.

    ReplyDelete
  15. Awesome snowflakes..very unique and that's why they are so cool.

    TFS

    ReplyDelete
  16. These snowflakes are so pretty. Thank you for sharing.

    P.S. I tried to leave a thank you on the download site, but couldn't register. I'm sure many others had the same problem.You are appreciated!

    ReplyDelete
  17. I love to check your blog and see what new and interesting designs you come up with. Thanks for sharing your wonderful ideas. I hope this is an encouragment to keep creating
    Carrie

    ReplyDelete
  18. I love the snowflakes!! The download site now comes up with the requirement to register - so I just decided to put comments here on your blog - which would you prefer? Thank you for sharing your files

    Laurel

    ReplyDelete
  19. Love this cut file!!! You are always thinking and coming up with the neatest ways to use our carts. Happy Day and Thanks so much for sharing.

    ReplyDelete
  20. Thank you Diana.
    I save almost all of your files
    for future use and really appreciate you posting it. I didn't even realize how to post a comment until you said something.
    Thanks again.

    Mary
    Wellington, Florida

    ReplyDelete
  21. I always love to check out your blog and to see what great CDS files your are creating and kind enough to share with the rest of us. I also downloaded your AE snowflakes. Thanks so much for sharing your talent with the rest of us.
    Angie Person

    ReplyDelete
  22. Thanks for the files. I love them, and just in time to make my Christmas cards!

    I love the download site, the countdown to when the download is ready is helpful. I wanted to sign up to comment in the sharing site, but I'm starting to get a bunch of spam and I'm trying to limit my logins to sites until I can figure it out!

    ReplyDelete
  23. Hi Diane. When I try to cut the snowflakes that I downloaded from you the welds aren't working. I Get a snowflake separate from the circle. Basically the inner circle that you welded to the flake doesn't cut. Can you help me? Wanda

    ReplyDelete
  24. Wanda - I did answer your other email but in case someone is reading these comments and has the same question I will answer here.

    You do have to be sure that you are using the August update version of the software - that is where the ability to weld within an existing frame was added. The version number is 1.0.20815.0 (displays when you first load the software). I have heard that a new update is coming in the next few days.

    If you are using that version and have trouble try closing the program and rebooting - it sometimes helps.

    ReplyDelete
  25. Thank you so much for sharing your cut files. You do amazing work!

    ReplyDelete
  26. Thanks for sharing your files, and thanks for your obsession with snow flakes, I love them.
    Shari Y . . .

    ReplyDelete

Thanks for taking the time to leave a comment. I love to hear from the people who read my blog. I moderate all comments to keep spam off the blog without making you decode the squiggly letters so your comment may not appear immediately.